TS W80 Mechanical seals

Model: TSW80
Place of Origin: Zhejiang,China (Mainland)
Brand Name: TiSun
functions:: for pump
expRegion:: America, UN, east asia,mideast etc
product:: pump seals
Pressure in the sealed chamber:: <= 0.5Mpa
Temperature in the sealed chamber:: -20oC~110oC
Linear Velocity:: <= 6m

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Payment Terms:L/C, D/P, D/A, T/T, WUProduction Capacity:50-100 each month
Min. Order:10 Piece/PiecesPacking:Carton
Means of Transport:Ocean, Air, LandDelivery Date:as per the...

Profile

Single seal, Balanced/ Independent of direction of rotation/ Metal bellow

Operating limits

Specification:38~127mm

Pressure:≤25bar

Temperature:-20℃~400℃

Linear speed:15m/s

This series consists of none torsion transmission and torsion transmission devices with the sealing loops of rotary & stationary ring are made from flexible graphite.

unit:mm

Seal failure cause analysis
1. Check the wear trace, found no grinding marks:
Sealing surface is not adhesive.Check whether spring compensation institution such as sliding or hampered.
2. No grinding crack but there are bright spots.
Sealing surface buckling will appear bright spot without grinding crack.Pressure is too high, gland screw is not tied to turn good or not good, or pump rough surface can form a bright spot.When two screw tied gland is used, its rigidity is not enough, the deformation is also one of the reasons that form the bright spot.
The emergence of this kind of symptom description: seal may leak a drive.

Category: Pump shaft seals

Related Category: Air compressor mechanical seals  Auto pump seals  PTFE Mechanical seals  Cartridge mechanical seals  Water pump seals 


«
QR Code
Contact Us
Welcome to our website !