Mechanical Seal's Requirement For Pump

Mechanical seal's Requirement for Pump

2010-05-31 14:00:02

As a contribution towards achieving this step change in operation, the pump maker should recognize those design and manufacturing aspects of pump design that affect the seal performance and, where necessary, alter pump design philosophy to ensure the pump to seal interface is idealised not only from the standpoint of the pump, but also from that of the mechanical seals. Here followed some requirement for the pump.
A. Radial runout of shaft < 0.03mm
B. Coaxiality of shaft and sealing chamber > 0.02mm
C. Verticality of shaft and sealing face < 0.05mm
D. Axial float <0.01 mm
E. Amplitude of vibration of the shaft during running <10um