Pump Shaft Seals

We are one of the professional China manufacturers work at Pump shaft seals. The following items are the relative products of the Pump shaft seals, you can quickly find the Pump shaft seals through the list.

inquire add basket Show: item per page
  • TS W80 Mechanical seals TSW80

    Profile
    Single seal, Balanced/ Independent of direction of rotation/ Metal bellow
    Operating limits
    Specification:38~127mm
    Pressure:≤25b

  • 212 type Mechanical seals TS212

    Operating limits
    Pressure:0-0.25MPa
    Temperature:-30℃~180℃
    Linear speed:≤1m/s

  • mechanical seals of 8B TS8B

    Introduction:
    Operating limits
    Pressure in the sealed chamber: 30kg/cm2
    Temperature in the sealed hamber:(4-1)-60℃~180℃ (4-2)-20℃~230℃

  • mechanical seal TS9A TYPE TS 9A

    Introduction:Operating limits
    Pressure:≤1.2MPa
    Temperature:-60℃~180℃
    -20℃~230℃
    Linear speed:≤25m/s

  • TS 9B Mechanical seals TS9B

    Introduction:Operating limits
    Pressure:≤1.2MPa
    Temperature:-60℃~180℃
    -20℃~230℃
    Linear speed:≤25m/s

  • 1523 1524 mechanical seals

    Introduction:Operating limits
    Pressure in the sealed chamber: ≤3MPa
    Temperature in the sealed chamber:-20℃~180℃
    Linear velocity:≤3000r/min

  • mechanical seals FOR chemical pump TS9B

    Introduction:Operating limits
    Pressure:≤1.2MPa
    Temperature:-60℃~180℃
    -20℃~230℃
    Linear speed:≤25m/s

  • formed metal bellows mechanical seal TS117

    Technic parameter
    work heat:0 -- 2.0MPa (monolayer piece);0 -- 3.5MPa (double-deck piece)
    work temperature:-75℃ -- 260℃

  • Auto cooling pump seals in car TSK

    Auto cooling pump seals
    Starionary ring(Plastic Carbon/Carbon/SiC)
    Secondary Seal(NBR/EPDM/HNBR)
    Spring(65Mn/SUS304/SUS316)

  • pump seals of 156 TS156

    Main Characteristics
    Pressure in the sealed chamber: <= 0.5Mpa
    Temperature in the sealed chamber: -20oC~110oC
    Linear Velocity: <= 6m

  • mechanical seals of TS 101 TS101

    Main Characteristics
    Mostly Use: major for suction pumps and ship pumps etc.

  • water pump seals OF 4702 type TS4702

    Description
    Main Characteristics
    Mostly Use: mediums face: general weak corrosive liquids and polluted
    water and so on,.

  • pump seals for Dynamic pump TS104

    APPLICATION
    Mmechanical seals are used in pumps, blowers, agitators, compressors, and other rotary shaft equipment.

  • pump seals of 24 type TS24

    Pressure in the sealed chamber: <= 0.6Mpa
    Temperature in the sealed chamber: -30~110oC
    Linear Velocity: <= 15m / sec

  • light pump seals for pump TS20

    Main Characteristics
    Pressure in the sealed chamber: <= 0.6Mpa
    Temperature in the sealed chamber: -30~110oC
    Linear Velocity: <= 15m / sec

  • pump seals submersible pumps TS202

    This products is fit for pumps .Major for submersible pumps and sewage pumps etc.

inquire add basket Show: item per page
Group of Pump shaft seals has been presented above, want more Pump shaft seals , Please Contact Us.


«
QR Code
Contact Us
Welcome to our website !